Smart Hub Manual¶
Framework draft
This manual is an initial framework page. Add verified model-specific data before treating it as release-ready.
Scope¶
This manual covers the Smart Hub product family and its public reseller/end-user installation and use information.
Product role¶
Central lighting controller for rooms, zones, scenes, modes, triggers and integration with ArtiLED lighting products.
Variants and models¶
Use this section for public variants such as Basic, Luxury, Pro, channel count, enclosure type, display/buttons, rackmount/wall-mount, and PSU type.
| Variant/model | Enclosure / mounting | Display/buttons | PSU | Notes |
|---|---|---|---|---|
| To be completed | To be completed | To be completed | To be completed | Verify against current price list and build docs. |
Package contents¶
- Product unit
- Power supply or mains connection details, depending on model
- Installation accessories where supplied
- Quick safety information
Installation overview¶
- Read the general safety and regulatory information first.
- Mount/place the product with adequate ventilation.
- Connect power only after all low-voltage/product wiring is checked.
- Connect network/control/audio/video/LED wiring as applicable.
- Power on and verify status indicators.
- Complete configuration in the relevant ArtiLED interface.
Connections¶
Document public connector names, safe wiring notes, and installer-facing limits here. Do not include internal PCB/build-only wiring unless it is required for installation.
First setup¶
Document the normal first-use workflow here:
- network discovery or IP access
- login/setup where applicable
- adoption/pairing where applicable
- product-specific configuration
- test procedure
Normal operation¶
Document daily/reseller-supported operation here.
Maintenance¶
- Keep ventilation openings free.
- Clean only with a dry or slightly damp cloth.
- Do not open the enclosure unless explicitly instructed by ArtiLED or a qualified installer.
- Disconnect power before inspection or service.
Troubleshooting¶
| Symptom | Possible cause | Action |
|---|---|---|
| Product does not power on | No power / PSU disconnected | Check mains outlet, PSU, fuse/protection and power connector. |
| Product is not reachable | Network or configuration issue | Check Ethernet/network, DHCP/static IP settings and switch port. |
| Unexpected behavior | Configuration or firmware mismatch | Restart safely, check product status, contact reseller/ArtiLED if persistent. |
Safety and regulatory information¶
This manual uses the common ArtiLED public safety/regulatory text. See Safety and Regulatory Information.