Control Blaster Manual¶
Framework draft
This manual is an initial framework page. Add verified model-specific data before treating it as release-ready.
Scope¶
This manual covers the Control Blaster product family and its public reseller/end-user installation and use information.
Product role¶
Control Processor family product focused on IR blasting / device-control output.
Variants and models¶
Use this section for public variants such as Basic, Luxury, Pro, channel count, enclosure type, display/buttons, rackmount/wall-mount, and PSU type.
| Variant/model | Enclosure / mounting | Display/buttons | PSU | Notes |
|---|---|---|---|---|
| To be completed | To be completed | To be completed | To be completed | Verify against current price list and build docs. |
Package contents¶
- Product unit
- Power supply or mains connection details, depending on model
- Installation accessories where supplied
- Quick safety information
Installation overview¶
- Read the general safety and regulatory information first.
- Mount/place the product with adequate ventilation.
- Connect power only after all low-voltage/product wiring is checked.
- Connect network/control/audio/video/LED wiring as applicable.
- Power on and verify status indicators.
- Complete configuration in the relevant ArtiLED interface.
Connections¶
Document public connector names, safe wiring notes, and installer-facing limits here. Do not include internal PCB/build-only wiring unless it is required for installation.
First setup¶
Document the normal first-use workflow here:
- network discovery or IP access
- login/setup where applicable
- adoption/pairing where applicable
- product-specific configuration
- test procedure
Normal operation¶
Document daily/reseller-supported operation here.
Maintenance¶
- Keep ventilation openings free.
- Clean only with a dry or slightly damp cloth.
- Do not open the enclosure unless explicitly instructed by ArtiLED or a qualified installer.
- Disconnect power before inspection or service.
Troubleshooting¶
| Symptom | Possible cause | Action |
|---|---|---|
| Product does not power on | No power / PSU disconnected | Check mains outlet, PSU, fuse/protection and power connector. |
| Product is not reachable | Network or configuration issue | Check Ethernet/network, DHCP/static IP settings and switch port. |
| Unexpected behavior | Configuration or firmware mismatch | Restart safely, check product status, contact reseller/ArtiLED if persistent. |
Safety and regulatory information¶
This manual uses the common ArtiLED public safety/regulatory text. See Safety and Regulatory Information.